Cat. # | Size | Price | Inventory |
---|---|---|---|
19541T | 20 µl | ||
19541S | 100 µl |
REACTIVITY | H |
SENSITIVITY | Endogenous |
MW (kDa) | 32, 40 |
Source/Isotype | Rabbit IgG |
Product Information
Application | Dilution |
---|---|
Western Blotting | 1:1000 |
IHC Leica Bond | 1:200 - 1:800 |
Immunohistochemistry (Paraffin) | 1:100 - 1:400 |
For western blots, incubate membrane with diluted primary antibody in 5% w/v nonfat dry milk, 1X TBS, 0.1% Tween® 20 at 4°C with gentle shaking, overnight.
NOTE: Please refer to primary antibody product webpage for recommended antibody dilution.
NOTE: Prepare solutions with reverse osmosis deionized (RODI) or equivalent grade water.
Load 20 µl onto SDS-PAGE gel (10 cm x 10 cm).
NOTE: Loading of prestained molecular weight markers (#59329, 10 µl/lane) to verify electrotransfer and biotinylated protein ladder (#7727, 10 µl/lane) to determine molecular weights are recommended.
NOTE: Volumes are for 10 cm x 10 cm (100 cm2) of membrane; for different sized membranes, adjust volumes accordingly.
* Avoid repeated exposure to skin.
posted June 2005
revised June 2020
Protocol Id: 263
NOTE: Please see product datasheet or product webpage for appropriate antibody dilution^.
Step | Reagents | Time/Temperature | |
---|---|---|---|
1 | Dewax | BOND™ Dewax Solution, 100% Alcohol, BOND™ Wash Solution | Pre-programmed Leica® BOND™ |
2 | Antigen Retrieval | BOND™ Epitope Retrieval ER2 Solution | 20 min., 100˚C | Protocol: HIER 20 min with ER2 |
3 | Peroxide Block | Refine Detection Kit Peroxide Block* | 5 min. |
WASH | BOND™ Wash Solution | 3x 0:00 min. | |
4 | Protein Block (optional) | #5425 NGS or #15019 Animal-Free Blocking Solution | 20 min. |
5 | Primary Antibody^ | Dilute in #8112 SignalStain® Antibody Diluent | 30 min. |
WASH | BOND™ Wash Solution | 3x 2:00 min. | |
NA | Post Primary Mouse Linker | Refine Detection Kit Post Primary* | Not Applied |
6 | Secondary Detection | Refine Detection Kit Polymer* | 10 min. |
WASH | BOND™ Wash Solution/Deionized Water | Custom (see below) | |
7a | Visualization | Refine Detection Kit Mixed DAB Refine* | 0:00 min. |
7b | Visualization | Refine Detection Kit Mixed DAB Refine* | 10 min. |
WASH | Deionized Water | 3x 0:00 min. | |
8 | Counterstain | Refine Detection Kit Hematoxylin* | 5 min. |
WASH | Deionized Water | 0:00 min. | |
WASH | BOND™ Wash Solution | 0:00 min. | |
WASH | Deionized Water | 0:00 min. | |
9 | Dehydration (Offline): | ||
Incubate sections in 95% ethanol two times for 10 seconds each. | |||
Repeat in 100% ethanol, incubating sections two times for 10 seconds each. | |||
Repeat in xylene, incubating sections two times for 10 seconds each. | |||
10 | Mount sections with coverslips and #84583 SignalStain® Mounting Medium | ||
Optional Custom wash: | BOND™ Wash Solution | 2:00 | |
BOND™ Wash Solution | Dispenser Type: OPEN 0:00 | ||
BOND™ Wash Solution | 2:00 | ||
BOND™ Wash Solution | Dispenser Type: OPEN 0:00 | ||
BOND™ Wash Solution | 0:00 | ||
Deionized Water | 0:00 |
*Reagent included in BOND™ Polymer Refine Detection Kit (Catalog No: DS9800)
LEICA® is a registered trademark of Leica Microsystems IR GmbH.
BOND™ is a trademark of Leica Biosystems Melbourne Pty. Ltd. No affiliation or sponsorship between CST and Leica Microsystems IR GmbH or Leica Biosystems Melbourne Pty. Ltd is implied.
posted August 2018
revised September 2018
Protocol Id: 1444
NOTE: Prepare solutions with reverse osmosis deionized (RODI) or equivalent grade water.
NOTE: Do not allow slides to dry at any time during this procedure.
For Citrate: Heat slides in a microwave submersed in 1X citrate unmasking solution until boiling is initiated; follow with 10 min at a sub-boiling temperature (95°-98°C). Cool slides on bench top for 30 min.
RECOMMENDED DETECTION REAGENTS |
SignalStain® Boost IHC Detection Reagent (HRP, Rabbit) #8114 | SignalStain® Boost IHC Detection Reagent (AP, Rabbit) #18653 |
---|---|---|
COMPATIBLE CHROMOGEN |
SignalStain® DAB Substrate Kit #8059 | SignalStain® Vibrant Red Alkaline Phosphatase Substrate Kit #76713 |
SignalStain® Vivid Purple Peroxidase Substrate Kit #96632 | SignalStain® Ultra Blue Alkaline Phosphatase Substrate Kit #12824 | |
SignalStain® Deep Black Peroxidase Substrate Kit #72986 | ||
SignalStain® Radiant Yellow Peroxidase Substrate Kit #69644 |
NOTE: Use of detection reagents other than those specified in this protocol may require further optimization of the primary antibody to account for the different sensitivities of the detection reagents.
posted February 2010
revised June 2020
Protocol Id: 283
Human
Monoclonal antibody is produced by immunizing animals with recombinant protein corresponding to the extracellular domain of human 4-1BB/CD137/TNFRSF9 protein.
TNFRSF9 is a member of the tumor necrosis factor receptor superfamily (1,2). It is also called 4-1BB or CD137 (1, 2). 4-1BB/CD137/TNFRSF9 is expressed in activated CD4+ and CD8+ T cells, natural killer cells and dendritic cells (2-5). The ligand 4-1BBL/CD137L/TNFSF9 on antigen presenting cells binds to 4-1BB/CD137/TNFRSF9 and costimulates the activation of T cells (5). The binding of agonistic antibodies to 4-1BB/CD137/TNFRSF9 also leads to costimulation for T cell activation (5). Studies have shown the effectiveness of targeting 4-1BB/CD137/TNFRSF9 by its agonistic antibodies in cancer immunotherapy (6).
Except as otherwise expressly agreed in a writing signed by a legally authorized representative of CST, the following terms apply to Products provided by CST, its affiliates or its distributors. Any Customer's terms and conditions that are in addition to, or different from, those contained herein, unless separately accepted in writing by a legally authorized representative of CST, are rejected and are of no force or effect.
Products are labeled with For Research Use Only or a similar labeling statement and have not been approved, cleared, or licensed by the FDA or other regulatory foreign or domestic entity, for any purpose. Customer shall not use any Product for any diagnostic or therapeutic purpose, or otherwise in any manner that conflicts with its labeling statement. Products sold or licensed by CST are provided for Customer as the end-user and solely for research and development uses. Any use of Product for diagnostic, prophylactic or therapeutic purposes, or any purchase of Product for resale (alone or as a component) or other commercial purpose, requires a separate license from CST. Customer shall (a) not sell, license, loan, donate or otherwise transfer or make available any Product to any third party, whether alone or in combination with other materials, or use the Products to manufacture any commercial products, (b) not copy, modify, reverse engineer, decompile, disassemble or otherwise attempt to discover the underlying structure or technology of the Products, or use the Products for the purpose of developing any products or services that would compete with CST products or services, (c) not alter or remove from the Products any trademarks, trade names, logos, patent or copyright notices or markings, (d) use the Products solely in accordance with CST Product Terms of Sale and any applicable documentation, and (e) comply with any license, terms of service or similar agreement with respect to any third party products or services used by Customer in connection with the Products.